Expert Water Leak Detection Services

At Elite Rooter, we offer a full range of water leak detection services designed to catch leaks early, prevent damage, and save you money.

Hidden water leaks are often difficult to spot, but there are key signs to watch for. An unexplained spike in your water bill is one of the most common indicators. You might also notice damp or discolored patches on walls, floors, or ceilings. A musty smell could mean mold growth, which is often a result of hidden moisture. Listen for sounds of running or dripping water when all fixtures are turned off. You can also conduct a meter test: note your water meter reading, avoid using water for a few hours, then check the meter again. If it changes, you likely have a hidden leak. If you notice any of these signs, it’s wise to contact a professional plumber who can use specialized tools to locate and fix the leak without causing extensive damage.

Professional leak detection can save you money by identifying leaks early before they cause extensive damage. Undetected leaks can lead to costly repairs, mold growth, and increased water bills. By addressing leaks promptly with our advanced detection services, you can avoid these expenses and maintain the integrity of your home’s plumbing system.

Signs of a leak behind a wall include discoloration, damp spots, bubbling paint or wallpaper, musty odors, and mold or mildew. Dripping or running-water sounds while fixtures are off may also indicate a concealed leak. Other clues include an unexplained rise in the water bill and soft or warped areas near plumbing lines. Finding the source early can limit structural damage and mold growth.

Detecting a slab leak, which occurs beneath the concrete foundation, requires a combination of careful observation and specialized tools. The best way to detect a slab leak starts with checking for warning signs like warm spots on the floor, damp carpet, or visible cracks in flooring or walls. Unexplained spikes in water bills and the sound of running water when fixtures are off are also red flags. Professionals use non-invasive techniques such as acoustic listening devices, which pick up the sound of leaking water under the slab. Thermal imaging cameras can detect temperature changes, which helps locate hot water leaks. In some cases, plumbers use a pressure test to confirm the presence of a leak. Once a slab leak is suspected, a professional plumber should be contacted to accurately locate and repair it, preventing further structural damage.

In older homes, there are several common areas where water leaks tend to occur due to aging infrastructure. Pipes under the foundation, known as slab leaks, are prevalent in older properties because of corrosion or shifting foundations. Bathroom fixtures, including toilets, sinks, and showers, are also frequent sources due to deteriorating seals or joints. Leaks behind walls, particularly around old galvanized steel or copper piping, are common as these materials corrode over time. Roofs and attic areas can also leak due to worn-out flashing or aged shingles. Kitchens, specifically under sinks, and around appliances like dishwashers are prone to leaks because of failing gaskets or connections. Outdoor spigots and irrigation systems may also develop leaks, especially if the fittings have loosened over time. Routine inspection and timely maintenance can help prevent major issues and reduce the risk of water damage in older homes.

If you suspect a water leak, act promptly. Check the water meter, avoid using water for a few hours, then check it again. A changed reading may indicate a leak. Inspect under sinks, around toilets, and along exposed pipes for moisture, puddles, or drips. Look for damp spots, peeling paint, or discoloration on walls and ceilings, and listen for running water when fixtures are off. If you cannot locate the source, a plumber can use thermal cameras and acoustic detectors to inspect concealed areas and help limit further damage.

The cost to detect and repair a water leak can vary depending on several factors, such as the leak’s location, the severity of the damage, and the detection method used. Leak detection services typically range from $100 to $400, depending on the complexity of the job and the equipment required. More sophisticated methods, like thermal imaging or acoustic detection, may increase the cost. Once the leak is detected, repair costs can range from $150 for a simple pipe fix to several thousand dollars if the leak is under concrete or has caused significant structural damage. Emergency services may also add to the cost. Investing in timely detection can save you money by preventing further damage and reducing the potential need for extensive repairs.